S3700 Radio Monitoring Receiver
(Frequency Range: 20MHz - 6GHz)
S3700 is a miniaturized receiver for the grid radio monitoring. S3700 cluster can be used to build a TCP / IP-based spectrum sensing network and provide comprehensive, reliable and flexible wise radio monitoring.
S3700 is capable to capture instantaneous and FH signals. Therefore it can manage intricate and multiple signal-monitoring tasks. S3700 is also equipped high-precision GPS time-synchronization module which is very convenient build a synchronous monitoring network.
Key Features
- Frequency Range 20MHz - 6GHz.
- 20MHz real time analysis bandwidth.
- 2 RF Input Interfaces.
- Multiple trigger capture functions.
- IQ / FFT data stream output
- 20ns synchronization accuracy and 100ns time-stamp accuracy
- Abundant programming interfaces.
- Small size, easy to install.
Typical Applications
- Grid Radio Monitoring
- Location of Radio Emission
Technical Specifications
| Frequency Range | 20MHz - 6GHz |
| Max. Analysis Bandwidth | 20MHz |
| Scan Speed | >4GHz/s（RBW 10kHz） |
| SSB Phase Noise (1GHz Carrier) | < -90dBc/Hz @10kHz |
| Average Noise Level | < -135dBm/Hz（Pre-amplifier off） < -158dBm/Hz（Pre-amplifier on） |
| Image Rejection | > 85dB |
| Amplitude Accuracy | ±3.0dB |
| RF Input Port | N (F)（50Ω）, 2 channel |
| Max. Input Power | +20dBm |
| Antenna Port Isolation | >40dB, 20 - 600MHz >30dB, 600 - 6000MHz |
| Port VSWR | <2.5:1 |
| Data Type | I / Q time series or FFT spectral data |
| Memory Capacity | 2GB |
| Clock synchronization | GPS |
| Timestamp Data accuracy | <100ns |
| Data Transmission | LAN, RJ-45 |
| GPS Interface | TNC (F) |
General Information
| General Specification | |
| Operating Temp. (℃) | -20℃ - +55℃ (-4°F-122°F) |
| Power Supply | DC: 12 - 18V |
| Max. Power Consumption | 30W |
| Weight (kg) | 5 kg |
| Dimension (L×W×H) | 295mm×83mm×270mm |